Add Dynamic Media Classic features to pages adding-scene-features-to-your-page

Adobe Dynamic Media Classic is a hosted solution for managing, enhancing, publishing, and delivering rich media assets to Web, mobile, email, and Internet-connected displays and print.

You can view Experience Manager assets published in Dynamic Media Classic in various viewers:

  • Zoom
  • Flyout
  • Video
  • Image Template
  • Image

You can publish digital assets directly from Experience Manager to Dynamic Media Classic and you can publish digital assets from Dynamic Media Classic to Experience Manager.

This document describes how to publish digital assets from Experience Manager to Dynamic Media Classic and conversely. Viewers are also described in detail. For information on configuring Experience Manager for Dynamic Media Classic, see Integrate Dynamic Media Classic with Experience Manager.

See also Add Image Maps.

For more information on using video components with Experience Manager, see Video.

NOTE
If Dynamic Media Classic assets do not display properly, make sure that Dynamic Media is disabled and then refresh the page.

Manually publishing to Dynamic Media Classic from assets manually-publishing-to-scene-from-assets

You can publish digital assets to Dynamic Media Classic as follows:

NOTE
Experience Manager publishes to Dynamic Media Classic asynchronously. After you select Publish, it takes several seconds for your asset to publish to Dynamic Media Classic.

Dynamic Media Classic components scene-components

The following Dynamic Media Classic components are available in Experience Manager:

  • Zoom
  • Flyout (Zoom)
  • Image Template
  • Image
  • Video
NOTE
These components are not available by default and must be selected in Design mode before using.

After they are made available in Design mode, you can add the components to your page like any other Experience Manager component. Assets that have not yet been published to Dynamic Media Classic are published to Dynamic Media Classic if in a synchronized folder or on a page or with a Dynamic Media Classic cloud configuration.

NOTE
If you are creating and developing custom viewers and using the Content Finder, you must explicitly add the allowfullscreen parameter.

Flash Viewers End-of-Life Notice flash-viewers-end-of-life-notice

Effective January 31, 2017, Adobe Dynamic Media Classic ended support for the Flash viewer platform.

Add a Dynamic Media Classic (Scene7) component to a page adding-a-scene-component-to-a-page

Adding a Dynamic Media Classic (Scene7) component to a page is the same as adding a component to any page. Dynamic Media Classic components are described in detail in the following sections.

To add a Dynamic Media Classic (Scene7) component to a page:

  1. In Experience Manager, open the page where you want to add the Dynamic Media Classic (Scene7) component.

  2. If no Dynamic Media Classic components are available, select Design mode, select any component with a blue border, select the Parent icon, and then the Configuration icon. In Parsys (Design), select all the Dynamic Media Classic components to make them available and select OK.

    chlimage_1-224

  3. Select Edit so you can return to Edit mode.

  4. Drag a component from the Dynamic Media Classic group in the sidekick onto the page in the desired location.

  5. Select the Configuration icon so you can open the component.

  6. Edit the component as necessary and select OK to save changes.

  7. Drag your image or video from the content browser onto the Dynamic Media Classic component you added to the page.

    note note
    NOTE
    In touch UI only, you must drag and drop the image or video onto the Dynamic Media Classic component you placed on the page. Selecting and editing the Dynamic Media Classic component and then choosing the asset is not supported.

Add an interactive viewing experience to a responsive site adding-interactive-viewing-experiences-to-a-responsive-website

Responsive design for your assets means that your asset adapts depending on where it is displayed. With responsive design, the same assets can be effectively displayed on multiple devices.

See also Responsive design for web pages.

To add an interactive viewing experience to a responsive site:

  1. Log in to Experience Manager, and ensure that you have configured Adobe Dynamic Media Classic Cloud Services and that Dynamic Media Classic components are available.

    note note
    NOTE
    If Dynamic Media Classic components are not available, be sure to enable them by way of Design mode.
  2. In a website with the Dynamic Media Classic components enabled, drag an Image component to the page.

  3. Select the component and select the configuration icon.

  4. In the Dynamic Media Classic Settings tab, adjust the breakpoints.

    chlimage_1-225

  5. Confirm that the viewers are responsively resizing and that all interactions are optimized for desktop, tablet, and mobile.

Settings common to all Dynamic Media Classic components settings-common-to-all-scene-components

Although configuration options vary, the following are common to all Dynamic Media Classic components:

  • File Reference - Browse to a file that you want to reference. File reference shows the asset URL and not necessarily the full Dynamic Media Classic URL including the URL commands and parameters. You cannot add Dynamic Media Classic URL commands and parameters in this field. Instead, you add them through the corresponding functionality in the component.
  • Width - Lets you set the width.
  • Height - Lets you set the height.

You set these configuration options by opening (double-clicking) a Dynamic Media Classic component, for example, when you open a Zoom component:

chlimage_1-226

Zoom zoom

The HTML5 Zoom component displays a larger image when you press the + button.

The asset has zoom tools at the bottom. Select + if you want to enlarge; select - if you want to reduce. Tapping the x or the reset zoom arrow brings the image back to the original size it was imported as. Select the diagonal arrows so you make it full screen. Select Edit so you can configure the component. With this component, you can configure settings common to all Dynamic Media Classic components.

chlimage_1-227

Flyout flyout

In the HTML5 Flyout component, the asset is shown as split screen; left the asset in the specified size; right the zoom portion is displayed. Select Edit so you can configure the component. With this component, you can configure settings common to all Dynamic Media Classic components.

NOTE
If your Flyout component uses a custom size, then that custom size is used and responsive setup of the component is disabled.
If your Flyout component uses the default size, as set in Design View, then the default size is used and the component stretches to accommodate the page layout size with responsive setup of the component enabled. There is a limitation on responsive setup of the component. When you use the Flyout component with responsive setup, do not use it with full page stretch. Otherwise, the Flyout extends beyond the page’s right border.

chlimage_1-228

Image image

The Dynamic Media Classic Image component lets you add Dynamic Media Classic functionality to your images, such as Dynamic Media Classic modifiers, image or viewer presets, and sharpening. The Dynamic Media Classic Image component is similar to other image components in Experience Manager with special Dynamic Media Classic functionality. In this example, the image has the Dynamic Media Classic URL modifier, &op_invert=1 applied.

chlimage_1-229

Title, Alt Text - In the Advanced tab, add a title to the image and alt text for those users who have graphics turned off.

URL, Open in - You can set an asset from to open a link. Set the URL and in Open in indicate whether you want it to open in the same window or a new window.

chlimage_1-230

Viewer preset - Select an existing viewer preset from the drop-down menu. If the viewer preset you are looking for is not visible, you must make it visible. See Manage Viewer Presets. You cannot select a viewer preset if you are using an image preset and conversely.

Dynamic Media Classic Configuration - Select the Dynamic Media Classic configuration you want to use to fetch active image presets from SPS.

Image preset - Select an existing image preset from the drop-down menu. If the image preset you are looking for is not visible, you must make it visible. See Manage Image Presets. You cannot select a viewer preset if you are using an image preset and conversely.

Output Format - Select the output format of the image, for example, jpeg. Depending on the output format you select, there are additional configuration options. See Image Preset best practices.

Sharpening - Select how you want to sharpen the image. Sharpening is explained in detail in Image Preset best practices and Sharpening best practices.

URL Modifiers - You can change image effects by supplying additional Dynamic Media Classic image commands. These commands are described in Image Presets and the Command reference.

Breakpoints - If your website is responsive, you want to adjust the breakpoints. Breakpoints must be separated by commas ( , ).

Image Template image-template

Dynamic Media Classic Image Templates are layered Photoshop content that was imported to Dynamic Media Classic, where content and properties were parameterized for variability. The Image template component lets you import images and change the text dynamically in Experience Manager. In addition, you can configure the Image template component to use values from client context, so that each user experiences the image in a personalized way.

Select Edit if you want to configure the component. You can configure settings common to all Dynamic Media Classic components and other settings described in this section.

chlimage_1-231

File Reference, Width, Height - See settings common to all ScDynamic Media Classicene7 components.

NOTE
Dynamic Media Classic URL commands and parameters cannot be added to the File Reference URL directly. They can only be defined in the component UI in the Parameter panel.

Title, Alt Text - In the Dynamic Media Classic Image Template tab, add a title to the image and alt text for those users who have graphics turned off.

URL, Open in - You can set an asset from to open a link. Set the URL and in Open in indicate whether you want it to open in the same window or a new window.

chlimage_1-232

Parameter Panel - When importing an image, the parameters are pre-populated with information from the image. If there is no content that can be dynamically changed, this window is empty.

chlimage_1-233

Change text dynamically changing-text-dynamically

To change the text dynamically, enter new text in the fields and select OK. In this example, the Price is now $50 and shipping is 99 cents.

chlimage_1-234

The text in the image changes. You can reset the text back to the original value by tapping Reset next to the field.

chlimage_1-235

Change text to reflect the value of a client context value changing-text-to-reflect-the-value-of-a-client-context-value

To link a field to a client context value, select Select to open the client-context menu, select the client context, and select OK. In this example, the name changes based on linking the Name with the formatted name in the profile.

chlimage_1-236

The text reflects the name of the currently logged in user. You can reset the text back to the original value by clicking Reset next to the field.

chlimage_1-237

  1. On the page with the Dynamic Media Classic Image Template component, select Edit.

  2. In the URL field, enter the URL that users go to when the image is tapped. In the Open in field, select whether you want the target to open (a new window or same window).

    chlimage_1-238

  3. Select OK.

Video component video-component

The Dynamic Media Classic Video component (available from the Dynamic Media Classic section of the sidekick) uses device and bandwidth detection to serve the right video to each screen. This component is an HTML5 video player; it is a single viewer that can be used cross channel.

It can be used for adaptive video sets, a single MP4 video, or a single F4V video.

See Video for more information on how videos work with Dynamic Media Classic integration. In addition, see the Dynamic Media Classic Video component versus the Foundation Video component.

chlimage_1-239

Known limitations of the video component known-limitations-for-the-video-component

Adobe DAM and WCM shows if a primary source video is uploaded. They do not show these proxy assets:

  • Dynamic Media Classic encoded renditions
  • Dynamic Media Classic adaptive video sets

When using an adaptive video set with the Dynamic Media Classic video component, you must resize the component to fit the dimensions of the video.

Dynamic Media Classic content browser scene-content-browser

The Dynamic Media Classic content browser lets you view content from Dynamic Media Classic directly in Experience Manager. To access the content browser, in the Content Finder, select Dynamic Media Classic in the touch-optimized user interface or the S7 icon in the classic user interface. Functionality is identical between both user interfaces.

If you have multiple configurations, Experience Manager by default displays the default configuration. You can select different configurations directly in the Dynamic Media Classic content browser in the drop-down menu.

NOTE
  • Assets in the on-demand folder do not appear in the Dynamic Media Classic content browser.

  • When Secure Preview is enabled, both published and unpublished assets on Dynamic Media Classic do appear in the Dynamic Media Classic content browser.

  • If you do not see Dynamic Media Classic or the S7 icon as an option in the content browser, you must configure Dynamic Media Classic to work with Experience Manager.

  • For video, the Dynamic Media Classic content browser supports:

    • Adaptive Video Sets: container of all video renditions needed for seamless playback across multiple screens
    • Single MP4 video
    • Single F4V video

Browse content in the touch-optimized UI browsing-content-in-the-touch-optimized-ui

You can access the content browser either in the touch-optimized or classic UI. Currently the touch-optimized has the following limitation:

  • FXG and Flash assets from Dynamic Media Classic are not supported.

Browse Dynamic Media Classic assets by selecting Dynamic Media Classic from the third drop-down menu. Dynamic Media Classic does not appear in the list if you have not configured Dynamic Media Classic/Experience Manager integration.

NOTE
  • The Dynamic Media Classic content browser loads about 100 assets and sorts them by name.
  • If you have a secure preview server set, the browser uses that preview server to render thumbnails and assets.

chlimage_1-240

In addition, you can browse resolution information, size, days since modification, and file name by hovering over the asset in the browser.

chlimage_1-241

  • For Adaptive Video Sets and Templates, no size information is generated for thumbnails.
  • For Adaptive Video Sets, no resolution is generated for thumbnails.

Search for Dynamic Media Classic assets with the content browser searching-for-scene-assets-with-the-content-browser

Searching for assets in Dynamic Media Classic is similar to searching for assets in Experience Manager Assets. However, when you search you are actually seeing a remote view of the assets in the Dynamic Media Classic system, rather than importing them directly into Experience Manager.

You can use either the classic UI or the touch-optimized UI to both view and search for assets. Depending on the interface, how you search is slightly different.

When searching in either UI, you can filter by the following criteria (shown here in the touch-optimized UI):

Enter keywords - You can search assets by name. When searching, the keywords you enter is what the file name starts with. For example, typing the word “swimming” would look for any asset file names that start with those letters in that order. Be sure to press enter after you type the term to find the asset.

chlimage_1-242

Folder/path - The name of the folder that is seen is based on the configuration you have selected. You can drill down to lower levels by tapping the folder icon and selecting a subfolder, then tapping the checkmark to select it.

If you enter a keyword and select a folder, Experience Manager searches that folder and any subfolders. However, if you do not enter any keywords when searching, selecting the folder only shows the assets in that folder and does not include any subfolders.

By default, Experience Manager searches the folder selected and all subfolders.

chlimage_1-243

Type of Asset - Select Dynamic Media Classic to browse Dynamic Media Classic content. This option is only available if Dynamic Media Classic has been configured.

chlimage_1-244

Configuration - If you have more than one Dynamic Media Classic configuration defined in Cloud Services, you can select it here. As a result, the folder changes based on the configuration you have chosen.

chlimage_1-245

Asset type - Within the Dynamic Media Classic browser, you can filter results to include any of the following: images, templates, videos, and adaptive video sets. If you do not select any asset type, Experience Manager, by default, searches all asset types.

chlimage_1-246

NOTE
  • In the classic UI, you can also search for Flash and FXG. Filtering for these types in the touch-optimized UI is not supported.

  • When searching video, you are searching a single rendition. Results return the original rendition (only *.mp4) and the encoded rendition.

  • When searching an adaptive video set, you are searchingthefolder and all subfolders but only if you have added a keyword to the search. If you have not added a keyword, Experience Manager does not search the subfolders.

Publish Status - You can filter for assets based on publication status: Unpublished or Published. If you do not select any Publish Status, Experience Manager by default searches all publish statuses.

chlimage_1-247

recommendation-more-help
19ffd973-7af2-44d0-84b5-d547b0dffee2