Show Menu
TOPICS×

Content Search and Indexing

Changes in AEM as a Cloud Service

With AEM as a Cloud Service, Adobe is moving away from an AEM instance centric model to a service based view with n-x AEM Containers, driven by CI/CD pipelines in the Cloud Manager. Instead of configuring and maintaining Indexes on single AEM instances, the Index configuration has to be specified before a deployment. Configuration changes in production are clearly breaking CI/CD policies. The same holds true for index changes since it can impact system stability and performance if not specified tested and re-indexed before bringing them into production.
Below is a list of the main changes compared to AEM 6.5 and earlier versions:
  1. Users will not have access to the Index Manager of a single AEM Instance to debug, configure or maintain indexing anymore. It is only used for local development and on-prem deployments.
  2. Users will not change Indexes on a single AEM Instance nor will they have to worry about consistency checks or reindexing anymore.
  3. In general, index changes are initiated before going to production in order to not circumvent quality gateways in the Cloud Manager CI/CD pipelines and not impact Business KPIs in production.
  4. All related metrics including search performance in production will be available for customers at runtime in order to provide the holistic view on the topics of Search and Indexing.
  5. Customers will be able to set up alerts according to their needs.
  6. SREs are monitoring system health 24/7 and will take action as needed and as early as possible.
  7. Index configuration is changed via deployments. Index definition changes are configured like other content changes.
  8. At a high level on AEM as a Cloud Service, with the introduction of the Blue-Green deployment model two sets of indexes will exist: one set for the old version (blue), and one set for the new version (green).
  1. Customers can see whether the indexing job is complete on the Cloud Manager build page and will receive a notification when the new version is ready to take traffic.
  2. Limitations: currently, index management on AEM as a Cloud Service is only supported for indexes of type lucene.

How to Use

Defining indexes can comprise of the 3 use cases:
  1. Adding a new customer index definition
  2. Updating an existing index definition. This effectively means adding a new version of an existing index definition
  3. Removing an existing index that is redundant or obsolete.
For both points 1 and 2 above, you need to create a new index definition as part of your custom code base in the respective Cloud Manager release schedule. For more information, see the Deploying to AEM as a Cloud Service documentation .

Preparing the New Index Defition

You need to prepare a new index definition package that contains the actual index definition, following this naming pattern:
<indexName>[-<productVersion>]-custom-<customVersion>
which then needs to go under ui.apps/src/main/content/jcr_root . Sub root folders are not supported as of now.
The package from the above sample is built as com.adobe.granite:new-index-content:zip:1.0.0-SNAPSHOT .

Deploying Index Definitions

There is a known issue with Jackrabbit Filevault Maven Package Plugin version 1.1.0 which does not allow you to add oak:index to modules of <packageType>application</packageType> . To work around this, please use version 1.0.4 .
Index definitions are now marked as custom and versioned:
  • The index definition itself (for example /oak:index/ntBaseLucene-custom-1 )
Therefore, in order to deploy an index, the index definition ( /oak:index/definitionname ) needs to be delivered via ui.apps via Git and the Cloud Manager deployment process.
Once the new index definition is added, the new application needs to be deployed via Cloud Manager. Upon deployment two jobs are started, responsible for adding (and merging if needed) the index definitions to MongoDB and Azure Segment Store for author and publish, respectively. The underlying repositories are being reindexed with the new index definitions, before the Blue-Green switch is taking place.

Index Management using Blue-Green Deployments

What is Index Management

Index management is about adding, removing, and changing indexes. Changing the definition of an index is fast, but applying the change (often called "building an index", or, for existing indexes, "reindexing") requires time. It is not instantaneous: the repository has to be scanned for data to be indexed.

What is Blue-Green Deployment

Blue-Green deployment can reduce downtime. It also allows for zero downtime upgrades and provides fast rollbacks. The old version of the application (blue) runs at the same time as the new version of the application (green).

Read-Only and Read-Write Areas

Certain areas of the repository (read-only parts of the repository) can be different in the old (blue) and in the new (green) version of the application. The read-only areas of the repository are typically " /app " and " /libs ". In the following example, italic is used to mark read-only areas, while bold is used for read-write areas.
  • /
  • /apps (read-only)
  • /content
  • /libs (read-only)
  • /oak:index
  • /oak:index/acme
  • /jcr:system
  • /system
  • /var
The read-write areas of the repository are shared between all versions of the application, while for each version of the application, there is a specific set of /apps and /libs .

Index Management Without Blue-Green Deployment

During development, or when using on premise installations, indexes can be added, removed, or changed at runtime. Indexes are used as soon as they are available. If an index is not supposed to be used in the old version of the application yet, then the index is typically built during a scheduled downtime. The same occurs when removing an index, or changing an existing index. When removing an index, it becomes unavailable as soon as it is removed.

Index Management With Blue-Green Deployment

With blue-green deployments, there is no downtime. However, for index management, this requires that indexes are only used by certain versions of the application. For example, when adding an index in version 2 of the application, you would not want it to be used by version 1 of the application yet. The reverse is the case when an index is removed: an index removed in version 2 is still needed in version 1. When changing an index definition, we want the old version of the index only to be used for version 1, and the new version of the index only to be used for version 2.
The following table shows 5 index definitions: index cqPageLucene is used in both versions while index damAssetLucene-custom-1 is used only in version 2.
<indexName>-custom-<customerVersionNumber> is needed for AEM as a Cloud Service to mark this as a replacement for an existing index.
Index
Out-of-the-box Index
Use in Version 1
Use in Version 2
/oak:index/damAssetLucene
Yes
Yes
No
/oak:index/damAssetLucene-custom-1
Yes (customized)
No
Yes
/oak:index/acmeProduct-custom-1
No
Yes
No
/oak:index/acmeProduct-custom-2
No
No
Yes
/oak:index/cqPageLucene
Yes
Yes
Yes
The version number is incremented each time the index is changed. In order to avoid custom index names colliding with index names of the product itself, custom indexes, as well as changes to out of the box indexes need to end with -custom-<number> .

Changes to Out-of-the-Box Indexes

Once Adobe changes an out-of-the-box index like "damAssetLucene" or "cqPageLucene", a new index named damAssetLucene-2 or cqPageLucene-2 is created, or, if the index was already customized, the customized index definition is merged with the changes in the out-of-the-box index, as shown below. Merging of changes happens automatically. That means that you do not need to do anything if an out-of-the-box index changes. However, it is possible to customize the index again later.
Index
Out-of-the-box Index
Use in Version 2
Use in Version 3
/oak:index/damAssetLucene-custom-1
Yes (customized)
Yes
No
/oak:index/damAssetLucene-2-custom-1
Yes (automatically merged from damAssetLucene-custom-1 and damAssetLucene-2)
No
Yes
/oak:index/cqPageLucene
Yes
Yes
No
/oak:index/cqPageLucene-2
Yes
No
Yes

Limitations

Index management is currently only supported for indexes of type lucene .

Removing an Index

If an index is to be removed in a later version of the application, you can define an empty index (an index with no data to index), with a new name. For example purposes, you can name it /oak:index/acmeProduct-custom-3 . This replaces the index /oak:index/acmeProduct-custom-2 . Once /oak:index/acmeProduct-custom-2 is removed by the system, the empty index /oak:index/acmeProduct-custom-3 can then also be removed.

Adding an Index

To add an index named "/oak:index/acmeProduct-custom-1" to be used in a new version of the application and later, the index needs to be configured as follows:
/oak:index/acmeProduct-custom-1
As above, this ensures the index is only used by the new version of the application.

Changing an Index

When an existing index is changed, a new index needs to be added with the changed index definition. For example, consider the existing index "/oak:index/acmeProduct-custom-1" is changed. The old index is stored under /oak:index/acmeProduct-custom-1 , and the new index is stored under /oak:index/acmeProduct-custom-2 .
The old version of the application uses the following configuration:
/oak:index/acmeProduct-custom-1
The new version of the application uses the following (changed) configuration:
/oak:index/acmeProduct-custom-2