Show Menu
TOPICS×

プリロール広告のある VOD 再生

このシナリオでは、メインコンテンツの前にプリロール広告が挿入されています。特に指定のない限り、ネットワーク呼び出しは、 広告のない VOD 再生 シナリオの呼び出しと同じです。ネットワーク呼び出しは同時に発生しますが、ペイロードは異なります。
トリガー
ハートビートメソッド
ネットワーク呼び出し  
メモ  
ユーザーが再生をクリックする
trackSessionStart
Analytics Content Start、Heartbeat Content Start
Measurement Library は、プリロール広告があることに気づかないので、これらのネットワーク呼び出しは、 広告のない VOD 再生 シナリオと同一です。
広告が開始されます。
  • trackEvent:AdBreakStart
  • trackEvent:AdStart
Analytics Ad Start、Heartbeat Ad Start
広告 #1 のフレームが再生されます。
trackPlay
Heartbeat Ad Play
メインコンテンツの前に広告コンテンツを再生し、ハートビートは、広告が開始する際に開始されます。
広告が再生されます。
Ad Heartbeats
広告 #2の再生が完了します。
trackEvent:trackAdComplete
Heartbeat Ad Complete
広告の終わりに到達しました。
広告 #2 の最初のフレームが再生されます。
trackEvent:AdStart
Analytics Ad Start、Heartbeat Ad Start
広告が再生されます。
Ad Heartbeats
広告 #2の再生が完了します。
  • trackEvent:trackAdComplete
  • trackEvent:AdBreakComplete
Heartbeat Ad Complete
広告の終わりとポッドの終わりに達しました。
コンテンツが再生されます。
Content Heartbeats
このネットワーク呼び出しは、 広告のない VOD 再生 シナリオと同じです。
コンテンツが完了する。
trackComplete
Heartbeat Content Complete
このネットワーク呼び出しは、 広告のない VOD 再生 シナリオと同じです。
セッションが終了する
trackSessionEnd
SessionEnd

パラメーター

広告の再生が開始されると、
Heartbeat Ad Start
呼び出しが送信されます。広告の開始が 10 秒のタイマーと同時に起こらない場合、
Heartbeat Ad Start
呼び出しは、数秒間遅延され、呼び出しは次の 10 秒のインターバルに進みます。これが発生すると、
Content Heartbeat
呼び出しは同じインターバルから出ます。この 2 つの呼び出しの違いは、イベントタイプとアセットタイプを調査することで区別できます。

Heartbeat Ad Start

パラメーター
メモ
s:event:type
start
s:asset:type
ad
広告は、
Content Heartbeats
と同じ基本モデルに従うので、
Ad Play
呼び出しは、
Content Play
呼び出しに似ています。

Heartbeat Ad Play 呼び出し

パラメーター
メモ
s:event:type
play
s:asset:type
ad
これらのパラメーターは
Content Heartbeats
呼び出しに似ていますが、
Ad Heartbeats
呼び出しは、いくつかの追加のパラメーターを含んでいます。

Ad Heartbeats

パラメーター
メモ
s:event:type
play
s:asset:type
ad
s:asset:ad_id
<広告 ID>
s:asset:pod_id
<広告ポッド ID>
Heartbeat Content Complete
呼び出しと同様、再生が完了した(再生ヘッドの終わりに達した)場合、
Heartbeat Ad Complete
呼び出しが送信されます。この呼び出しは、他の
Heartbeat Ad
呼び出しに似ていますが、いくつか特有のものが含まれます。

Heartbeat Ad Complete 呼び出し

パラメーター
メモ
s:event:type
complete
s:asset:type
ad

プリロール広告ブレークのサンプルコード

このシナリオでは、VOD は、プリロール広告、2 番目のプリロール広告で構成され、次にコンテンツが再生されます。
  • Android
    Android でこのシナリオを表示するには、以下のコードを設定します。
    // Set up mediaObject MediaObject mediaInfo = MediaHeartbeat.createMediaObject( Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH, MediaHeartbeat.StreamType.VOD ); HashMap<String, String> videoMetadata = new HashMap<String, String>(); videoMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); videoMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 1. Call trackSessionStart() when the user clicks Play or if autoplay is used, // i.e., there's an intent to start playback. _mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Pre-roll MediaObject adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); MediaObject adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Context ad data HashMap<String, String> adMetadata = new HashMap<String, String>(); adMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); adMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the pre-roll pod starts // to play. Note that since this is a pre-roll, call must track the // "MediaHeartbeat.Event.AdBreakStart" event before you call trackPlay(). _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the pre-roll pod's ad starts // to play. Note that since this is a pre-roll, you must track the // "MediaHeartbeat.Event.AdStart" event before you call trackPlay(). _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the playback actually starts, i.e., when the first frame // of the ad video is rendered on the screen. _mediaHeartbeat.trackPlay(); ....... ....... // 5. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the end, // i.e., when the ad completes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 6. Track the MediaHeartbeat.Event.AdStart event when the pre-roll pod's second ad // starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 7. Track the MediaHeartbeat.Event.AdComplete event when the second ad reaches the // end, i.e., the second ad completes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 8. Track the MediaHeartbeat.Event.AdBreakComplete event when all of the ads in the // pod finish playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete, null, null); ....... ....... // 9. Call trackComplete() when the playback reaches the end, i.e., when the video // completes and finishes playing. _mediaHeartbeat.trackComplete(); ........ ........ // 10. Call trackSessionEnd() when the playback session is over. This method must be // called even if the user does not watch the video to completion. _mediaHeartbeat.trackSessionEnd(); ........ ........
  • iOS -
    iOS でこのシナリオを表示するには、以下のコードを設定します。
    // Set up mediaObject ADBMediaObject *mediaObject = [ADBMediaHeartbeat createMediaObjectWithName:MEDIA_NAME length:MEDIA_LENGTH streamType:ADBMediaHeartbeatStreamTypeVOD]; NSMutableDictionary *videoContextData = [[NSMutableDictionary alloc] init]; [videoContextData setObject:CUSTOM_VAL_1 forKey:CUSTOM_KEY_1]; [videoContextData setObject:CUSTOM_VAL_2 forKey:CUSTOM_KEY_2]; // 1. Call trackSessionStart when the user clicks Play or if autoplay is used, // i.e., there is an intent to start playback. [_mediaHeartbeat trackSessionStart:mediaObject data:videoContextData]; ....... ....... // Pre-roll ADBMediaObject *adBreakInfo = [ADBMediaHeartbeat createAdBreakObjectWithName:AD_BREAK_NAME position:AD_BREAK_POSITION startTime:AD_BREAK_START_TIME]; ADBMediaObject *adInfo = [ADBMediaHeartbeat createAdObjectWithName:AD_NAME adId:AD_ID position:AD_POSITION length:AD_LENGTH]; // context ad data NSMutableDictionary *adDictionary = [[NSMutableDictionary alloc] init]; [adDictionary setObject:@"custom-val1" forKey:@"custom-key1"]; [adDictionary setObject:@"custom-val2" forKey:@"custom-key2"]; // 2. Track the ADBMediaHeartbeatEventAdBreakStart event when the pre-roll pod // starts to play. Note that since this is a pre-roll, you must track the // "ADBMediaHeartbeatEventAdBreakStart" event before you call trackPlay. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakStart mediaObject:adBreakObject data:nil]; ....... ....... // 3. Track the ADBMediaHeartbeatEventAdStart event when the pre-roll pod's // ad starts to play. Note that since this is a pre-roll, you must track // the "ADBMediaHeartbeatEventAdStart" event before you call trackPlay. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adObject data:adDictionary]; ....... ....... // 4. Call trackPlay when the playback actually starts, i.e., when the // first frame of the main content is rendered on the screen. [_mediaHeartbeat trackPlay]; ....... ....... // 5. Track the ADBMediaHeartbeatEventAdComplete event when the ad reaches // the end, i.e., when the video completes and finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 6. Track the ADBMediaHeartbeatEventAdStart event when the pre-roll pod's // second ad starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adBreakObject data:nil]; ....... ....... // 7. Track the ADBMediaHeartbeatEventAdComplete event when the second ad // reaches the end, i.e., it completes and finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 8. Track the ADBMediaHeartbeatEventAdBreakComplete event when all the // ads in the pod finish playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakComplete mediaObject:adBreakObject data:nil]; ....... ....... // 9. Call trackComplete when the playback reaches the end, i.e., when the // video completes and finishes playing. [_mediaHeartbeat trackComplete]; ....... ....... // 10. Call trackSessionEnd when the playback session is over. This method // must be called even if the user does not watch the video to completion. [_mediaHeartbeat trackSessionEnd]; ....... .......
  • JavaScript
    JavaScript でこのシナリオを表示するには、以下のテキストを入力します。
    // Set up mediaObject var mediaInfo = MediaHeartbeat.createMediaObject(Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH,MediaHeartbeat.StreamType.VOD); var videoMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2, CUSTOM_KEY_3 : CUSTOM_VAL_3 }; // 1. Call trackSessionStart() when Play is clicked or if autoplay is used, // i.e., there's an intent to start playback. this._mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Preroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_AD_KEY_1 : CUSTOM_AD_VAL_1, CUSTOM_AD_KEY_2 : CUSTOM_AD_VAL_2 }; // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the preroll pod starts to play. // Note that since this is a preroll, track the MediaHeartbeat.Event.AdBreakStart // event before you call trackPlay(). this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the preroll pod's ad starts to play. // Note that since this is a preroll, track the MediaHeartbeat.Event.AdStart event before // you call trackPlay(). this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the playback actually starts, i.e., the first frame of the main content is rendered on the screen. this._mediaHeartbeat.trackPlay(); ....... ....... // 5. Track event MediaHeartbeat.Event.AdComplete when the ad reaches the end, // i.e., when it completes and finishes playing. this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 6. Track the MediaHeartbeat.Event.AdStart event when the preroll pod's second // ad starts to play. this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 7. Track the MediaHeartbeat.Event.AdComplete event when the second ad reaches // the end, i.e., when it completes and finishes playing. this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 8. Track the MediaHeartbeat.Event.AdBreakComplete event when all the ads // in the pod finish playing. this._mediaheartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // 9. Call trackComplete() when the playback reaches the end, i.e., when it // completes and finishes playing. this._mediaHeartbeat.trackComplete(); // 10. Call trackSessionEnd() when the playback session is over. This method must // be called even if the user does not watch the video to completion. this._mediaHeartbeat.trackSessionEnd(); ....... .......

複数の広告ブレークのサンプルコード

このシナリオでは、VOD コンテンツは、プリロール広告、コンテンツ、ミッドロール広告、コンテンツ、ポストロール広告を再生します。
  • Android
    Android でこのシナリオを表示するには、以下のコードを設定します。
    // Set up mediaObject MediaObject mediaInfo = MediaHeartbeat.createMediaObject( Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH, MediaHeartbeat.StreamType.VOD ); HashMap<String, String> videoMetadata = new HashMap<String, String>(); videoMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); videoMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 1. Call trackSessionStart() when the user clicks Play or if autoplay is used, // i.e., there's an intent to start playback. _mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Pre-roll MediaObject adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); MediaObject adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Context ad data HashMap<String, String> adMetadata = new HashMap<String, String>(); adMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); adMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the pre-roll pod // starts to play. Note that since this is a pre-roll, you must track the // "MediaHeartbeat.Event.AdBreakStart" event before you call trackPlay(). _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the pre-roll pod's ad // starts to play. Note that since this is a pre-roll, you must track the // "MediaHeartbeat.Event.AdStart" event before you call trackPlay(). _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the playback actually starts, i.e., when the first // frame of the main content is rendered on the screen. _mediaHeartbeat.trackPlay(); ....... ....... // 5. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the end, // i.e., when the ad completes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 6. Track the MediaHeartbeat.Event.AdBreakComplete event when all of the ads in //; the pod finish playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete, null, null); ....... ....... // Mid-roll MediaObject adBreakInfo = MediaHeartbeat.createAdBreakObject(mid-roll_BREAK_NAME, mid-roll_BREAK_POSITION, mid-roll_BREAK_START_TIME); MediaObject adInfo = MediaHeartbeat.createAdObject(mid-roll_AD_NAME, mid-roll_AD_ID, mid-roll_AD_POSITION, mid-roll_AD_LENGTH); // Context ad data HashMap<String, String> adMetadata = new HashMap<String, String>(); adMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); adMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 7. Track the MediaHeartbeat.Event.AdBreakStart event when the mid-roll pod // starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 8. Track the MediaHeartbeat.Event.AdStart event when the mid-roll pod's ad // starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 9. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the end, // i.e., when the adcompletes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 10. Track the MediaHeartbeat.Event.AdBreakComplete event when all the ads in the // mid-roll pod finish playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete, null, null); ....... ....... // Post-roll MediaObject adBreakInfo = MediaHeartbeat.createAdBreakObject(POSTROLL_BREAK_NAME, POSTROLL_BREAK_POSITION, POSTROLL_BREAK_START_TIME); MediaObject adInfo = MediaHeartbeat.createAdObject(POSTROLL_AD_NAME, POSTROLL_AD_ID, POSTROLL_AD_POSITION, POSTROLL_AD_LENGTH); // Context ad data HashMap<String, String> adMetadata = new HashMap<String, String>(); adMetadata.put(CUSTOM_KEY_1, CUSTOM_VAL_1); adMetadata.put(CUSTOM_KEY_2, CUSTOM_VAL_2); // 11. Track the MediaHeartbeat.Event.AdBreakStart event when the post-roll pod // starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 12. Track the MediaHeartbeat.Event.AdStart event when the post-roll pod's // ad starts to play. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 13. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the // end, i.e., when the ad completes and finishes playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 14. Track the MediaHeartbeat.Event.AdBreakComplete event when all the ads in // the post-roll pod finish playing. _mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete, null, null); ....... ....... // 15. Call trackComplete() when the playback reaches the end, i.e., when the // video completes and finishes playing. _mediaHeartbeat.trackComplete(); ........ ........ // 16. Call trackSessionEnd() when the playback session is over. This method // must be called even if the user does not watch the video to completion. _mediaHeartbeat.trackSessionEnd(); ........ ........
  • iOS
    iOS でこのシナリオを表示するには、以下のコードを設定します。
    // Set up mediaObject ADBMediaObject *mediaObject = [ADBMediaHeartbeat createMediaObjectWithName:MEDIA_NAME length:MEDIA_LENGTH streamType:ADBMediaHeartbeatStreamTypeVOD]; NSMutableDictionary *videoContextData = [[NSMutableDictionary alloc] init]; [videoContextData setObject:CUSTOM_VAL_1 forKey:CUSTOM_KEY_1]; [videoContextData setObject:CUSTOM_VAL_2 forKey:CUSTOM_KEY_2]; // 1. Call trackSessionStart when the user clicks Play or if autoplay is used, // i.e., there is an intent to start playback. [_mediaHeartbeat trackSessionStart:mediaObject data:videoContextData]; ....... ....... // Pre-roll ADBMediaObject *adBreakInfo = [ADBMediaHeartbeat createAdBreakObjectWithName:AD_BREAK_NAME position:AD_BREAK_POSITION startTime:AD_BREAK_START_TIME]; ADBMediaObject *adInfo = [ADBMediaHeartbeat createAdObjectWithName:AD_NAME adId:AD_ID position:AD_POSITION length:AD_LENGTH]; // Context ad data NSMutableDictionary *adDictionary = [[NSMutableDictionary alloc] init]; [adDictionary setObject:@"custom-val1" forKey:@"custom-key1"]; [adDictionary setObject:@"custom-val2" forKey:@"custom-key2"]; // 2. Track the ADBMediaHeartbeatEventAdBreakStart event when the // pre-roll pod starts to play. Note that since this is a pre-roll, // you must track the ADBMediaHeartbeatEventAdBreakStart event // before you call trackPlay. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakStart mediaObject:adBreakObject data:adDictionary]; ....... ....... // 3. Track the ADBMediaHeartbeatEventAdStart when the pre-roll // pod's ad starts to play. Note that since this is a pre-roll, // you must track the ADBMediaHeartbeatEventAdStart before you // call trackPlay. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adObject data:adDictionary]; ....... ....... // 4. Call trackPlay when the playback actually starts, i.e., when // the first frame of the main content is rendered on the screen. [_mediaHeartbeat trackPlay]; ....... ....... // 5. Track the ADBMediaHeartbeatEventAdComplete event when the ad // reaches the end, i.e., when it completes and finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 6. Track the ADBMediaHeartbeatEventAdBreakComplete event when all // of the ads in the pod finish playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakComplete mediaObject:nil data:nil]; ....... ....... // Mid-roll ADBMediaObject *adBreakInfo = [ADBMediaHeartbeat createAdBreakObjectWithName:MIDROLL_BREAK_NAME position:MIDROLL_BREAK_POSITION startTime:MIDROLL_BREAK_START_TIME]; ADBMediaObject *adInfo = [ADBMediaHeartbeat createAdObjectWithName:MIDROLL_AD_NAME adId:MIDROLL_AD_ID position:MIDROLL_AD_POSITION length:MIDROLL_AD_LENGTH]; // context ad data NSMutableDictionary *midrollAdDictionary = [[NSMutableDictionary alloc] init]; [midrollAdDictionary setObject:@"custom-val1" forKey:@"custom-key1"]; [midrollAdDictionary setObject:@"custom-val2" forKey:@"custom-key2"]; // 7. Track the ADBMediaHeartbeatEventAdBreakStart event when the mid-roll pod // starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakStart mediaObject:adBreakObject data:nil]; ....... ....... // 8. Track the ADBMediaHeartbeatEventAdStart event when the mid-roll pod's // ad starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adObject data:midrollAdDictionary]; ....... ....... // 9. Track the ADBMediaHeartbeatEventAdComplete event when the ad reaches // the end, i.e., when it completes and finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 10. Track the ADBMediaHeartbeatEventAdBreakComplete event when all the // ads in the mid-roll pod finish playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakComplete mediaObject:nil data:nil]; ....... ....... // Post-roll ADBMediaObject *postrollBreakInfo = [ADBMediaHeartbeat createAdBreakObjectWithName:POSTROLL_BREAK_NAME position:POSTROLL_BREAK_POSITION startTime:POSTROLL_BREAK_START_TIME]; ADBMediaObject *adInfo = [ADBMediaHeartbeat createAdObjectWithName:POSTROLL_AD_NAME adId:POSTROLL_AD_ID position:POSTROLL_AD_POSITION length:POSTROLL_AD_LENGTH]; // Context ad data NSMutableDictionary *postrollAdDictionary = [[NSMutableDictionary alloc] init]; [postrollAdDictionary setObject:@"custom-val1" forKey:@"custom-key1"]; [postrollAdDictionary setObject:@"custom-val2" forKey:@"custom-key2"]; // 11. Track the ADBMediaHeartbeatEventAdBreakStart event when the // post-roll pod starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakStart mediaObject:adBreakObject data:nil]; ....... ....... // 12. Track the ADBMediaHeartbeatEventAdStart event when the // post-roll pod's ad starts to play. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdStart mediaObject:adObject data:postrollAdDictionary]; ....... ....... // 13. Track the ADBMediaHeartbeatEventAdComplete event when the // post-roll pod's ad finishes playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdComplete mediaObject:nil data:nil]; ....... ....... // 14. Track the ADBMediaHeartbeatEventAdBreakComplete event when // all the ads in the post-roll pod finish playing. [_mediaHeartbeat trackEvent:ADBMediaHeartbeatEventAdBreakComplete mediaObject:nil data:nil]; ....... ....... // 15. Call trackComplete when the playback reaches the end, // i.e., when the video completes and finishes playing. [_mediaHeartbeat trackComplete]; ....... ....... // 16. Call trackSessionEnd when the playback session is over. This method // must be called even if the user does not watch the video to completion. [_mediaHeartbeat trackSessionEnd]; ....... .......
  • JavaScript
    JavaScript でこのシナリオを表示するには、以下のテキストを入力します。
    // Set up mediaObject MediaObject mediaInfo = MediaHeartbeat.createMediaObject( Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH, MediaHeartbeat.StreamType.VOD ); var videoMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2, CUSTOM_KEY_3 : CUSTOM_VAL_ }; // 1. Call trackSessionStart() when Play is clicked or if autoplay is used, // i.e., when there's an intent to start playback. this._mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Preroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the preroll pod // starts to play. Note that since this is a preroll, you must track the // MediaHeartbeat.Event.AdBreakStart event before you call trackPlay(). this._trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo, null); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the preroll pod's ad // starts to play. Note that since this is a preroll, you must track the // MediaHeartbeat.Event.AdStart event before you call trackPlay(). this._heartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the main content actually starts, i.e., when the // first frame of the video content is rendered on the screen. this._mediaHeartbeat.trackPlay(); ....... ....... // 5. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches the end, // i.e., when the ad completes and finishes playing. this._heartbeat.trackEvent(MediaHeartbeat.Event.AdComplete, null, null); ....... ....... // 6. Track the MediaHeartbeat.Event.AdBreakComplete event when all of the ads in // the pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // Midroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(MIDROLL_BREAK_NAME, MIDROLL_BREAK_POSITION, MIDROLL_BREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(MIDROLL_AD_NAME, MIDROLL_AD_ID, MIDROLL_AD_POSITION, MIDROLL_AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 7. Track the MediaHeartbeat.Event.AdBreakStart event when the // midroll pod starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo); ....... ....... // 8. Track the MediaHeartbeat.Event.AdStart event when the midroll // pod's ad starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 9. Track the MediaHeartbeat.Event.AdComplete event when the ad // reaches the end, i.e., when the ad completes and finishes playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 10. Track the MediaHeartbeat.Event.AdBreakComplete event when all of // the ads in the midroll pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // Set up mediaObject var mediaInfo = MediaHeartbeat.createMediaObject( Configuration.MEDIA_NAME, Configuration.MEDIA_ID, Configuration.MEDIA_LENGTH, MediaHeartbeat.StreamType.VOD ); var videoMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2, CUSTOM_KEY_3 : CUSTOM_VAL_3 }; // 1. Call trackSessionStart() when Play is clicked or if autoplay // is used, i.e., when there's an intent to start playback. this._mediaHeartbeat.trackSessionStart(mediaInfo, videoMetadata); ...... ...... // Preroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(ADBREAK_NAME, ADBREAK_POSITION, ADBREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(AD_NAME, AD_ID, AD_POSITION, AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 2. Track the MediaHeartbeat.Event.AdBreakStart event when the preroll pod // starts to play. Note that since this is a preroll, you must track the // MediaHeartbeat.Event.AdBreakStart event before you call trackPlay(). this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo); ....... ....... // 3. Track the MediaHeartbeat.Event.AdStart event when the preroll pod's // ad starts to play. Note that since this is a preroll, you must track // the MediaHeartbeat.Event.AdStart event before you call trackPlay(). this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 4. Call trackPlay() when the playback actually starts, i.e., when the first // frame of the main content is rendered on the screen. _mediaHeartbeat.trackPlay(); ....... ....... // 5. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches // the end, i.e., when the ad completes and finishes playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 6. Track the MediaHeartbeat.Event.AdBreakComplete event when all // of the ads in the pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // Mid-roll var adBreakInfo = MediaHeartbeat.createAdBreakObject(MIDROLL_BREAK_NAME, MIDROLL_BREAK_POSITION, MIDROLL_BREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(MIDROLL_AD_NAME, MIDROLL_AD_ID, MIDROLL_AD_POSITION, MIDROLL_AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 7. Track the MediaHeartbeat.Event.AdBreakStart event when the midroll // pod starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo); ....... ....... // 8. Track the MediaHeartbeat.Event.AdStart event when the midroll pod's // ad starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 9. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches // the end, i.e., when the ad completes and finishes playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 10. Track the MediaHeartbeat.Event.AdBreakComplete event when all // of the ads in the midroll pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // Postroll var adBreakInfo = MediaHeartbeat.createAdBreakObject(POSTROLL_BREAK_NAME, POSTROLL_BREAK_POSITION, POSTROLL_BREAK_START_TIME); var adInfo = MediaHeartbeat.createAdObject(POSTROLL_AD_NAME, POSTROLL_AD_ID, POSTROLL_AD_POSITION, POSTROLL_AD_LENGTH); // Custom ad metadata var adMetadata = { CUSTOM_KEY_1 : CUSTOM_VAL_1, CUSTOM_KEY_2 : CUSTOM_VAL_2 }; // 11. Track the MediaHeartbeat.Event.AdBreakStart event when the postroll // pod starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakStart, adBreakInfo); ....... ....... // 12. Track the MediaHeartbeat.Event.AdStart event when the postroll pod's ad // starts to play. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdStart, adInfo, adMetadata); ....... ....... // 13. Track the MediaHeartbeat.Event.AdComplete event when the ad reaches // the end, i.e., when the ad completes and finishes playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdComplete); ....... ....... // 14. Track the MediaHeartbeat.Event.AdBreakComplete event when all of // the ads in the postroll pod finish playing. this._mediaHeartbeat.trackEvent(MediaHeartbeat.Event.AdBreakComplete); ....... ....... // 15. Call trackComplete() when the playback reaches the end, i.e., when playback // completes and finishes playing. this._mediaHeartbeat.trackComplete(); ........ ........ // 16. Call trackSessionEnd() when the playback session is over. This method must be called // even if the user does not watch the video to completion. this._mediaHeartbeat.trackSessionEnd(); ........ ........