Show Menu
화제×

어셈블러 서비스 Java API QuickStart(SOAP)

Assembler 서비스에서 Java API 빠른 시작(SOAP)을 사용할 수 있습니다.
AEM Forms 작업은 AEM Forms 강력한 형식의 API를 사용하여 수행할 수 있으며 연결 모드는 SOAP로 설정해야 합니다.
AEM Forms을 사용한 프로그래밍에 있는 빠른 시작은 JBoss Application Server 및 Microsoft Windows 운영 체제에 배포되는 Forms 서버를 기반으로 합니다. 그러나 UNIX와 같은 다른 운영 체제를 사용하는 경우 Windows 특정 경로를 해당 운영 체제에서 지원되는 경로로 바꿉니다. 마찬가지로 다른 J2EE 응용 프로그램 서버를 사용하는 경우 올바른 연결 속성을 지정해야 합니다. 연결 속성 설정을 참조하십시오.

빠른 시작(SOAP 모드): Java API를 사용하여 PDF 문서 취합

다음 Java 코드 예제는 map.pdf directions.pdf라는 두 개의 PDF 소스 문서를 하나의 PDF ** 문서로 병합합니다. 단일 PDF 문서의 이름은 AssemblerResultPDF.pdf입니다 . DCX 문서의 이름은 shell.xml입니다 . 자세한 내용은 프로그래밍 방식으로 PDF 문서 조합을 참조하십시오 .
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="out.pdf">
     * <PDF source="map.pdf" />
     * <PDF source="directions.pdf" />
     * </PDF>
     *</DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class InvokeAssemblerSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\shell.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Create a Map object to store PDF source documents
             Map inputs = new HashMap();
             FileInputStream mySourceMap = new FileInputStream("C:\\map.pdf");
             FileInputStream mySourceOptions = new FileInputStream("C:\\directions.pdf");
 
             //Create a Document object based on the map.pdf source file
             Document myPDFMapSource = new Document(mySourceMap);
 
             //Create a Document object based on the directions.pdf source file
             Document myPDFOptionsSource = new Document(mySourceOptions);
 
             //Place two entries into the Map object
             inputs.put("map.pdf",myPDFMapSource);
             inputs.put("directions.pdf",myPDFOptionsSource);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();
 
             //Retrieve the result PDF document from the Map object
             Document outDoc = null;
 
             //Iterate through the map object to retrieve the result PDF document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();
 
                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("out.pdf"))
                 {
                     Object o = e.getValue();
                     outDoc = (Document)o;
 
                     //Save the result PDF file
                     File myOutFile = new File("C:\\AssemblerResultPDF.pdf");
                     outDoc.copyToFile(myOutFile);
                 }
             }
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

빠른 시작(SOAP 모드): Java API를 사용하여 PDF 문서 분리

다음 Java 코드 예제에서는 AssemblerResultPDF.pdf라는 PDF 문서를 분해합니다 . DCX 문서의 이름은 shell_disassemble.xml입니다 . 분해된 각 PDF 문서의 이름이 지정됩니다 ResultPDF[Number].pdf . 즉, 첫 번째로 분해된 PDF 문서의 이름은 ResultPDF1.pdf입니다. 이 코드 예제에서 사용되는 shell_disassemble.xml DDX 문서에 대한 자세한 내용은 프로그래밍 방식으로 PDF 문서 정리 을 참조하십시오.
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     *<DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDFsFromBookmarks prefix="stmt">
     * <PDF source="AssemblerResultPDF.pdf"/>
     *</PDFsFromBookmarks>
     *</DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class DisassemblePDFSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_disassemble.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Create a Map object to store PDF source documents
             Map inputs = new HashMap();
             FileInputStream mySourceMap = new FileInputStream("C:\\AssemblerResultPDF.pdf");
 
             //Create a Document object based on the map.pdf source file
             Document myPDFSource = new Document(mySourceMap);
 
             //Place two entries into the Map object
             inputs.put("AssemblerResultPDF.pdf",myPDFSource);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Submit the job to the Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();
 
             //Retrieve the result PDF documents from the Map object
             Document outDoc = null;
             int index = 0;
 
             //Iterate through the map object to retrieve the result PDF document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();
                 Object o = e.getValue();
 
                 //Cast the Object to a Document
                 //and save to a file
                 outDoc = (Document)o;
                 File myOutFile = new File("C:\\ResultPDF"+index +".pdf");
                 outDoc.copyToFile(myOutFile);
                 index++;
             }
             if (index > 0)
                 System.out.println("The PDF document was disassembled into "+index+" PDF documents.");
             else
                 System.out.println("The PDF document was not disassembled.");
 
         }catch (Exception e) {
             System.out.println("Error OCCURRED: "+e.getMessage());
         }
     }
 }

빠른 시작(SOAP 모드): Java API를 사용하여 암호화된 PDF 문서 취합

다음 Java 코드 예제에서는 암호로 암호화된 PDF 문서를 어셈블합니다. 비보안 PDF 문서의 이름은 Loan.pdf입니다 . DDX 문서의 이름은 shell_Encrypt.xml입니다 . 암호화된 PDF 문서의 이름은 AssemblerEncryptedPDF.pdf입니다 . 자세한 내용은 암호화된 PDF 문서 정리 참조
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     *<?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="EncryptLoan.pdf" encryption="userProtect">
     * <PDF source="inDoc" />
     * </PDF>
     * <PasswordEncryptionProfile name="userProtect" compatibilityLevel="Acrobat7">
     * <OpenPassword>AdobeOpen</OpenPassword>
     * </PasswordEncryptionProfile>
     * </DDX>
     */
 
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class AssembleEncryptedDocumentSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             /*
              * Create a FileInputStream object based on an existing DDX file
              * This DDX document contains instructions to encrypt the PDF document
              */
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_Encrypt.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Reference an unsecured PDF document
             FileInputStream mySourceLoan = new FileInputStream("C:\\Loan.pdf");
 
             //Create a Document object based on the Loan.pdf source file
             Document myPDFLoanSource = new Document(mySourceLoan);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Submit the job to Assembler service
             Document jobResult = assemblerClient.invokeOneDocument(myDDX,myPDFLoanSource,assemblerSpec);
 
             //Create the output file
             File myOutFile = new File("C:\\AssemblerEncryptedPDF.pdf");
             jobResult.copyToFile(myOutFile);
 
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

빠른 시작(SOAP 모드): Java API를 사용하여 Bates 번호 매기기를 사용하여 PDF 문서 취합

다음 Java 코드 예제에서는 고유한 페이지 식별자(bates 번호 매기기)를 사용하여 PDF 문서를 작성합니다. DCX 문서의 이름은 shell_Bates.xml입니다 . 어셈블러 서비스에서 반환되는 PDF 문서는 AssemblerResultBatesPDF.pdf라는 PDF 파일 로 저장됩니다 . (Bates 번호 매기기를 사용하여 문서 정리 참조)
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="out.pdf">
     * <Header>
     * <Center>
     * <StyledText>
     * <p font-size="20pt"><BatesNumber/></p>
     * </StyledText>
     * </Center>
     * </Header>
     * <PDF source="map.pdf" />
     * <PDF source="directions.pdf" />
     * </PDF>
     * </DDX>
     */
 
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 
 public class AssembleBatesNumberDocumentSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_Bates.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Create a Map object to store PDF source documents
             Map<String, Object> inputs = new HashMap<String, Object>();
             FileInputStream mySourceMap = new FileInputStream("C:\\Adobe\map.pdf");
             FileInputStream mySourceOptions = new FileInputStream("C:\\Adobe\directions.pdf");
 
             //Create a Document object based on the map.pdf source file
             Document myPDFMapSource = new Document(mySourceMap);
 
             //Create a Document object based on the directions.pdf source file
             Document myPDFOptionsSource = new Document(mySourceOptions);
 
             //Place two entries into the Map object
             inputs.put("map.pdf",myPDFMapSource);
             inputs.put("directions.pdf",myPDFOptionsSource);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Set the initial number to 100
             assemblerSpec.setFirstBatesNumber(100);
 
             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();
 
             //Retrieve the result PDF document from the Map object
             Document outDoc = null;
 
             //Iterate through the map object to retrieve the result PDF document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();
 
                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("out.pdf"))
                 {
                     //Cast the Object to a Document
                     Object o = e.getValue();
                     outDoc = (Document)o;
 
                     //Create the output file
                     File myOutFile = new File("C:\\AssemblerResultBatesPDF.pdf");
                     outDoc.copyToFile(myOutFile);
                 }
             }
             System.out.println("The PDF that contains Bates numbering was assembled.");
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

빠른 시작(SOAP 모드): Java API를 사용하여 비대화형 PDF 문서 취합

다음 Java 코드 예제에서는 비대화형 PDF 문서를 조합합니다. Assembler 서비스로 전달되는 대화형 PDF 문서의 이름은 Loan.pdf입니다 . DDX 문서의 이름은 shell_XFA.xml입니다 . 비대화형 PDF 문서는 AssembleNonInteractivePDF.pdf라는 PDF 파일 로 저장됩니다 . ( 비대화형 PDF 문서 조합 참조 )
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="out.pdf">
     * <PDF source="inDoc"/>
     * <NoXFA/>
     * </PDF>
     * </DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class AssembleNonInteractiveSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             /*
              * Create a FileInputStream object based on an existing DDX file
              * This DDX document contains instructions to create
              * a non-interactive PDF document
              */
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_XFA.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Reference an interactive PDF document
             FileInputStream mySourceLoan = new FileInputStream("C:\\Adobe\Loan.pdf");
 
             //Create a Document object based on the Loan.pdf source file
             Document myPDFLoanSource = new Document(mySourceLoan);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Submit the job to Assembler service and get back a
             //non-interactive PDF document
             Document outDoc = assemblerClient.invokeOneDocument(myDDX,myPDFLoanSource,assemblerSpec);
 
             //Save the non-interactive PDF document
             File myOutFile = new File("C:\\AssembleNonInteractivePDF.pdf");
             outDoc.copyToFile(myOutFile);
 
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }
 
 

빠른 시작(SOAP 모드): Java API를 사용하여 문서가 PDF/A 규격인지 확인

다음 Java 코드 예제에서는 입력 PDF 문서가 PDF/A 규격인지 확인합니다. 어셈블러 서비스로 전달되는 입력 PDF 문서의 이름은 Loan.pdf입니다 . DDX 문서의 이름은 shell_PDFA.xml입니다. 어셈블러 서비스에서 반환되는 XML 문서이며 입력 PDF 문서가 PDF/A 규격인지 여부를 지정하는 XML 문서입니다. 이 코드 예제에 사용되는 shell_PDFA.xml DDX 문서에 대한 자세한 내용은 문서가 PDF/A- 규격 여부 확인을 참조하십시오.
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * This quick start validates the following DDX document:
     *<?xml version="1.0" encoding="UTF-8"?>
     *<DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <DocumentInformation source="Loan.pdf" result="Loan_result.xml">
     * <PDFAValidation compliance="PDF/A-1b" resultLevel="Detailed" ignoreUnusedResources="true" allowCertificationSignatures="true" />
     * </DocumentInformation>
     *</DDX>
     */
 
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class AssembleDeterminePDFASOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\shell_PDFA.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Create a Map object to store PDF source documents
             Map inputs = new HashMap();
             FileInputStream mySourceMap = new FileInputStream("C:\\Adobe\Loan.pdf");
 
             //Create a Document object based on the map.pdf source file
             Document myPDFMapSource = new Document(mySourceMap);
 
             //Place two entries into the Map object
             inputs.put("Loan.pdf",myPDFMapSource);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();
 
             //Retrieve the result PDF document from the Map object
             Document outDoc = null;
 
             //Iterate through the map object to retrieve the result XML
             //document that specifies if the input document is
             //PDF/A compliant
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();
 
                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("Loan_result.xml"))
                 {
                     //Get the element value
                     Object o = e.getValue();
 
                     //Cast the Object to a Document
                     outDoc = (Document)o;
 
                     //Save the XML file
                     File myMXLFile = new File("C:\\Adobe\result.xml");
                     outDoc.copyToFile(myMXLFile);
                      }
                 }
 
             System.out.println("The results are written to result.xml.");
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

빠른 시작(SOAP 모드): Java API를 사용하여 DCX 문서 유효성 검사

다음 Java 코드 예제에서는 bookmarkDDX.xml이라는 파일을 기반으로 DCX 문서의 유효성을 검사합니다 . DDX 문서 유효성 검사를 참조하십시오 .
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * This quick start validates the following DDX document:
     *&<?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="out.pdf">
     * <PDF source="map.pdf" />
     * <PDF source="directions.pdf" />
     * </PDF>
     * </DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class ValidateDDXSOAP
 {
     public static void main(String[] args) {
 
         boolean isValid = false;
            Document outLog = null;
 
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\bookmarkDDX.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setValidateOnly(true);
             assemblerSpec.setLogLevel("FINE");
             assemblerSpec.setFailOnError(false);
 
             //Validate the DDX document
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,null,assemblerSpec);
             outLog = jobResult.getJobLog();
             isValid = true;
 
         }catch (Exception e) {
              if (e instanceof OperationException) {
                     OperationException oe = (OperationException) e;
                     outLog = oe.getJobLog();
                     File myOutFile = new File("C:\\test.xml");
                     outLog.copyToFile(myOutFile);
                 }
              e.printStackTrace();
          } finally {
                if (outLog != null) {
                    File myOutFile = new File("C:\\test.xml");
                    outLog.copyToFile(myOutFile);
               }
           if (isValid) {
                 // do something
           } else {
                // do something else
              }
           }
     }
 }

빠른 시작(SOAP 모드): Java API를 사용하여 책갈피를 사용하여 PDF 문서 취합

다음 Java 코드 예제에서는 책갈피가 포함된 PDF 문서를 작성합니다. DCX 문서의 이름은 bookmarkDDX.xml 입니다 . PDF 문서에 추가할 책갈피를 설명하는 책갈피 XML 문서의 이름입니다. 결과 PDF 문서가 AssemblerResultBookmarks.pdf라는 PDF 파일로 저장됩니다. (책갈피를 사용하여 PDF 문서 조합 참조 )
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * * This quick start uses the following DDX document:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="FinalDoc.pdf">
     * <PDF source="Loan.pdf">
     * <Bookmarks source="doc2" />
     * </PDF>
     * </PDF>
     * </DDX>
     *
     * This quick start also uses the following bookmarks XML
     * to assemble a PDF document containing bookmarks:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <Bookmarks xmlns="https://ns.adobe.com/pdf/bookmarks" version="1.0">
     * <Bookmark>
     * <Action>
     * <Launch NewWindow="true">
     * <File Name="C:\Adobe\LoanDetails.pdf" />
     * </Launch>
     * </Action>
     * <Title>Open the Loan document</Title>
     * </Bookmark>
     * <Bookmark>
     * <Action>
     * <Launch>
     * <Win Name="C:\WINDOWS\notepad.exe" />
     * </Launch>
     * </Action>
     * <Title>Launch NotePad</Title>
     * </Bookmark>
     * </Bookmarks>
     *
     */
     import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class AssembleBookmarksSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms using SOAP mode
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\bookmarkDDX.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Create a Map object to store an input PDF document and a Bookmark
             //XML document
             Map inputs = new HashMap();
             FileInputStream mySourceMap = new FileInputStream("C:\\Loan.pdf");
             FileInputStream bookmarkInfo = new FileInputStream("C:\\bookmarks.xml");
 
             //Create a Document object based on the Loan.pdf source file
             Document myPDFMapSource = new Document(mySourceMap);
 
             //Create a Document object based on the bookmarks.xml file
             Document myBookmarkXML= new Document(bookmarkInfo);
 
             //Place two entries into the Map object
             inputs.put("Loan.pdf",myPDFMapSource);
             inputs.put("doc2",myBookmarkXML);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();
 
             //Retrieve the result PDF document from the Map object
             Document outDoc = null;
 
             //Iterate through the map object to retrieve the result PDF document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();
 
                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("FinalDoc.pdf"))
                 {
                     Object o = e.getValue();
                     outDoc = (Document)o;
 
                     //Save the result PDF file
                     File myOutFile = new File("C:\\Adobe\Assembler\Output\AssemblerResultBookmarks.pdf");
                     outDoc.copyToFile(myOutFile);
                 }
             }
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }
 

빠른 시작(SOAP 모드): Java API를 사용하여 DCX 문서를 동적으로 만들기

다음 Java 코드 예제에서는 PDF 문서를 분해하는 DDX 문서를 동적으로 만듭니다. 입력 PDF 문서의 각 레벨 1 책갈피에 대해 새 PDF 문서가 만들어집니다. 이 코드 예에는 두 개의 사용자 정의 메서드가 포함되어 있습니다.
  • createDDX : 어셈블러 서비스로 전송되는 DDC 문서를 나타내는 개체를 만듭니다. org.w3c.dom.Document 이 사용자 정의 메서드는 org.w3c.dom.Document 개체를 반환합니다.
  • convertDDX : 개체를 org.w3c.dom.Document 개체로 com.adobe.idp.Document 변환합니다. 이 메서드는 org.w3c.dom.Document 개체를 입력 매개 변수로 받아들이고 개체를 com.adobe.idp.Document 반환합니다.
    이 두 방법 모두 이 빠른 시작 시 호출됩니다. (DDX 문서 동적으로 만들기를 참조하십시오 .)"
/*
 * This Java Quick Start uses the SOAP mode and contains the following JAR files
 * in the class path:
 * 1. adobe-assembler-client.jar
 * 2. adobe-livecycle-client.jar
 * 3. adobe-usermanager-client.jar
 * 4. adobe-utilities.jar
 * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
 * on JBoss)
 * 6. activation.jar (required for SOAP mode)
 * 7. axis.jar (required for SOAP mode)
 * 8. commons-codec-1.3.jar (required for SOAP mode)
 * 9. commons-collections-3.1.jar (required for SOAP mode)
 * 10. commons-discovery.jar (required for SOAP mode)
 * 11. commons-logging.jar (required for SOAP mode)
 * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
 * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
 * 14. jaxrpc.jar (required for SOAP mode)
 * 15. log4j.jar (required for SOAP mode)
 * 16. mail.jar (required for SOAP mode)
 * 17. saaj.jar (required for SOAP mode)
 * 18. wsdl4j.jar (required for SOAP mode)
 * 19. xalan.jar (required for SOAP mode)
 * 20. xbean.jar (required for SOAP mode)
 * 21. xercesImpl.jar (required for SOAP mode)
 *
 * These JAR files are located in the following path:
 * <install directory>/sdk/client-libs/common
 *
 * The adobe-utilities.jar file is located in the following path:
 * <install directory>/sdk/client-libs/jboss
 *
 * The jboss-client.jar file is located in the following path:
 * <install directory>/jboss/bin/client
 *
 * SOAP required JAR files are located in the following path:
 * <install directory>/sdk/client-libs/thirdparty
 *
 * If you want to invoke a remote forms server instance and there is a
 * firewall between the client application and the server, then it is
 * recommended that you use the SOAP mode. When using the SOAP mode,
 * you have to include these additional JAR files
 *
 * For information about the SOAP
 * mode, see "Setting connection properties" in Programming
 * with AEM Forms
 *
 * The following XML represents the DDX document created in this quick start:
 * <?xml version="1.0" encoding="UTF-8"?>
 * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
 * <PDF result="out.pdf">
 * <PDF source="inDoc"/>
 * <NoXFA/>
 * </PDF>
 * </DDX>
 */
import com.adobe.livecycle.assembler.client.*;
import java.util.*;
import java.io.ByteArrayOutputStream;
import java.io.File;
import java.io.FileInputStream;
import javax.xml.parsers.DocumentBuilder;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Element;
import com.adobe.idp.Document;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
public class AssemblePDFWithDynamicDDXSOAP {
 public static void main(String[] args) {
   try {
    //Set connection properties required to invoke AEM Forms using SOAP mode
    Properties connectionProps = new Properties();
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT,
     "https://'[server]:[port]'");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL, ServiceCl ientFactoryProperties.DSC_SOAP_PROTOCOL);
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE,
     "JBoss");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME,
     "administrator");
    connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD,
     "password");
    //Create a ServiceClientFactory instance
    ServiceClientFactory myFactory =
     ServiceClientFactory.createInstance(connectionProps);
    //Create an AssemblerServiceClient object
    AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
    //Dynamically create a DDX document
    org.w3c.dom.Document myDDX = createDDX();
    //Covert the DDX document to a com.adobe.idp.Document instance
    com.adobe.idp.Document ddx = convertDDX(myDDX);
    //Create a Map object to store PDF source documents
    Map inputs = new HashMap();
    FileInputStream mySourceMap = new FileInputStream("C:\\AssemblerResultPDF.pdf");
    //Create a Document object based on the map.pdf source file
    Document myPDFSource = new Document(mySourceMap);
    //Place the entry into the Map object
    inputs.put("AssemblerResultPDF.pdf", myPDFSource);
    //Create an AssemblerOptionsSpec object
    AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
    assemblerSpec.setFailOnError(false);
    //Submit the job to Assembler service and use the dynamically created DDX document
    AssemblerResult jobResult = assemblerClient.invokeDDX(ddx, inputs, assemblerSpec);
    java.util.Map allDocs = jobResult.getDocuments();
    //Retrieve the result PDF document from the Map object
    Document outDoc = null;
    int index = 1;
    //Iterate through the map object to retrieve the result PDF documents
    for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
     // Retrieve the Map object's value
     Map.Entry e = (Map.Entry) i.next();
     Object o = e.getValue();
     //Cast the Object to a Document
     //and save to a file
     outDoc = (Document) o;
     File myOutFile = new File("C:\\ResultPDF" + index + ".pdf");
     outDoc.copyToFile(myOutFile);
     index++;
    }
   } catch (Exception e) {
    e.printStackTrace();
   }
  }
  //Creates a DDX document using an org.w3c.dom.Document object
 private static org.w3c.dom.Document createDDX() {
   org.w3c.dom.Document document = null;
   try {
    //Create DocumentBuilderFactory and DocumentBuilder objects
    DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
    DocumentBuilder builder = factory.newDocumentBuilder();
    //Create a new Document object
    document = builder.newDocument();
    //Create the root element and append it to the XML DOM
    Element root = (Element) document.createElement("DDX");
    root.setAttribute("xmlns", "https://ns.adobe.com/DDX/1.0/");
    document.appendChild(root);
    //Create the PDFsFromBookmarks element
    Element PDFsFromBookmarks =
     (Element) document.createElement("PDFsFromBookmarks");
    PDFsFromBookmarks.setAttribute("prefix", "stmt");
    root.appendChild(PDFsFromBookmarks);
    //Create the PDF element
    Element PDF = (Element) document.createElement("PDF");
    PDF.setAttribute("source", "AssemblerResultPDF.pdf");
    PDFsFromBookmarks.appendChild(PDF);
   } catch (Exception e) {
    System.out.println("The following exception occurred: " + e.getMessage());
   }
   return document;
  }
  //Converts an org.w3c.dom.Document object to a
  //com.adobe.idp.Document object
 private static Document convertDDX(org.w3c.dom.Document myDOM) {
  byte[] mybytes = null;
  try {
   //Create a Java Transformer object
   TransformerFactory transFact = TransformerFactory.newInstance();
   Transformer transForm = transFact.newTransformer();
   //Create a Java ByteArrayOutputStream object
   ByteArrayOutputStream myOutStream = new ByteArrayOutputStream();
   //Create a Java Source object
   javax.xml.transform.dom.DOMSource myInput = new DOMSource(myDOM);
   //Create a Java Result object
   javax.xml.transform.stream.StreamResult myOutput = new StreamResult(myOutStream);
   //Populate the Java ByteArrayOutputStream object
   transForm.transform(myInput, myOutput);
   // Get the size of the ByteArrayOutputStream buffer
   int myByteSize = myOutStream.size();
   //Allocate myByteSize to the byte array
   mybytes = new byte[myByteSize];
   //Copy the content to the byte array
   mybytes = myOutStream.toByteArray();
  } catch (Exception e) {
   System.out.println("The following exception occurred: " + e.getMessage());
  }
  //Create a com.adobe.idp.Document object and copy the
  //contents of the byte array
  Document myDocument = new Document(mybytes);
  return myDocument;
 }
}

빠른 시작(SOAP 모드): Java API를 사용하여 PDF 포트폴리오 취합

다음 Java 코드 예제에서는 PDF 포트폴리오를 만듭니다. PDF 포트폴리오는 AssemblerResultPortfolio.pdf라는 PDF 파일로 저장됩니다 . (PDF 포트폴리오 취합 참조 .)
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * This is the DDX file used to create a PDF portfolio:
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <PDF result="portfolio1.pdf">
     * <Portfolio>
     * <Navigator source="myNavigator">
     * <Resource name="navigator/image.xxx" source="myImage.png"/>
     * </Navigator>
     * </Portfolio>
     * <PackageFiles source="dog1"  >
     * <FieldData name="X">72</FieldData>
     * <FieldData name="Y">72</FieldData>
     * <File filename="saint_bernard.jpg" mimetype="image/jpeg"/>
     * </PackageFiles>
     * <PackageFiles source="dog2"  >
     * <FieldData name="X">120</FieldData>
     * <FieldData name="Y">216</FieldData>
     * <File filename="greyhound.pdf"/>
     * </PackageFiles>
     * </PDF>
     * </DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class CreatePDFPortfolioSOAP {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\Adobe\portfolioAssembly.xml");
             FileInputStream myNavFile = new FileInputStream("C:\\Adobe\AdobeOnImage.nav");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
             Document myNav = new Document(myNavFile);
 
             //Create a Map object to store PDF source documents
             Map<String,Object> input = new HashMap<String, Object>();
             FileInputStream mySourceNavImage = new FileInputStream("C:\\Adobe\myImage.png");
             FileInputStream mySourceDog1 = new FileInputStream("C:\\Adobe\saint_bernard.jpg");
             FileInputStream mySourceDog2 = new FileInputStream("C:\\Adobe\greyhound.pdf");
 
             //Create a Document object based on the myImage.png source file
             Document myPDFNavImageSource = new Document(mySourceNavImage);
 
             //Create a Document object based on the MyFirstFile.pdf source file
             Document myPDFDog1Source = new Document(mySourceDog1);
 
             //Create a Document object based on the MySecondFile.txt source file
             Document myPDFDog2Source = new Document(mySourceDog2);
 
             //Place two entries into the Map object
             input.put("myNavigator", myNav);
             input.put("myImage.png",myPDFNavImageSource);
             input.put("dog1",myPDFDog1Source);
             input.put("dog2",myPDFDog2Source);
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,input,assemblerSpec);
             Map<String,Document> allDocs = jobResult.getDocuments();
 
             //Retrieve the result PDF document from the Map object
             Document outDoc = null;
 
             //Iterate through the map object to retrieve the result PDF document
             for (Iterator<Map.Entry<String,Document>> i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object?s value
                 Map.Entry<String,Document> e = (Map.Entry<String,Document>)i.next();
 
                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("portfolio1.pdf"))
                 {
                     Object o = e.getValue();
                     outDoc = (Document)o;
 
                     //Save the result PDF file
                     File myOutFile = new File("C:\\Adobe\AssemblerResultPortfolio.pdf");
                     outDoc.copyToFile(myOutFile);
                 }
             }
 
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }
 
 

빠른 시작(SOAP 모드): Java API를 사용하여 여러 XDP 조각 취합

다음 Java 코드 예제에서는 다음 XDP 파일을 기반으로 하는 XDP 조각을 어셈블합니다. tac018_template_crrolled.xdp , tc018_contact.xdp ​및* tuc018_patient.xdp* 모든 조각을 포함하는 어셈블된 XDP 문서는 AssemblerResultXDP.xdp라는 XDP 파일 로 저장됩니다 . (여러 XDP 조각 조합을 참조하십시오 .)
 /*
     * This Java Quick Start uses the SOAP mode and contains the following JAR files
     * in the class path:
     * 1. adobe-assembler-client.jar
     * 2. adobe-livecycle-client.jar
     * 3. adobe-usermanager-client.jar
     * 4. adobe-utilities.jar
     * 5. jboss-client.jar (use a different JAR file if the forms server is not deployed
     * on JBoss)
     * 6. activation.jar (required for SOAP mode)
     * 7. axis.jar (required for SOAP mode)
     * 8. commons-codec-1.3.jar (required for SOAP mode)
     * 9.  commons-collections-3.1.jar  (required for SOAP mode)
     * 10. commons-discovery.jar (required for SOAP mode)
     * 11. commons-logging.jar (required for SOAP mode)
     * 12. dom3-xml-apis-2.5.0.jar (required for SOAP mode)
     * 13. jaxen-1.1-beta-9.jar (required for SOAP mode)
     * 14. jaxrpc.jar (required for SOAP mode)
     * 15. log4j.jar (required for SOAP mode)
     * 16. mail.jar (required for SOAP mode)
     * 17. saaj.jar (required for SOAP mode)
     * 18. wsdl4j.jar (required for SOAP mode)
     * 19. xalan.jar (required for SOAP mode)
     * 20. xbean.jar (required for SOAP mode)
     * 21. xercesImpl.jar (required for SOAP mode)
     *
     * These JAR files are located in the following path:
     * <install directory>/sdk/client-libs/common
     *
     * The adobe-utilities.jar file is located in the following path:
     * <install directory>/sdk/client-libs/jboss
     *
     * The jboss-client.jar file is located in the following path:
     * <install directory>/jboss/bin/client
     *
     * SOAP required JAR files are located in the following path:
     * <install directory>/sdk/client-libs/thirdparty
     *
     * If you want to invoke a remote forms server instance and there is a
     * firewall between the client application and the server, then it is
     * recommended that you use the SOAP mode. When using the SOAP mode,
     * you have to include these additional JAR files
     *
     * For information about the SOAP
     * mode, see "Setting connection properties" in Programming
     * with AEM Forms
     *
     * The following XML represents the DDX document used in this quick start:
     * <?xml version="1.0" encoding="UTF-8"?>
     * <DDX xmlns="https://ns.adobe.com/DDX/1.0/">
     * <XDP result="tuc018result.xdp">
     * <XDP source="tuc018_template_flowed.xdp">
     * <XDPContent insertionPoint="ddx_fragment" source="tuc018_contact.xdp" fragment="subPatientContact" required="false"/>
     * <XDPContent insertionPoint="ddx_fragment" source="tuc018_patient.xdp" fragment="subPatientPhysical" required="false"/>
     * <XDPContent insertionPoint="ddx_fragment" source="tuc018_patient.xdp" fragment="subPatientHealth" required="false"/>
     * </XDP>
     * </XDP>
     * </DDX>
     */
 import com.adobe.livecycle.assembler.client.*;
 import java.util.*;
 import java.io.File;
 import java.io.FileInputStream;
 import com.adobe.idp.Document;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
 import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;
 
 public class AssembleFragmentsSOAP
 {
     public static void main(String[] args) {
         try{
             //Set connection properties required to invoke AEM Forms
             Properties connectionProps = new Properties();
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
             connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");
 
             //Create a ServiceClientFactory instance
             ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);
 
             //Create an AssemblerServiceClient object
             AssemblerServiceClient assemblerClient = new AssemblerServiceClient(myFactory);
 
             //Create a FileInputStream object based on an existing DDX file
             FileInputStream myDDXFile = new FileInputStream("C:\\Adobe\fragmentDDX.xml");
 
             //Create a Document object based on the DDX file
             Document myDDX = new Document(myDDXFile);
 
             //Create a Map object to store the input XDP files
             Map inputs = new HashMap();
             FileInputStream inSource = new FileInputStream("C:\\Adobe\tuc018_template_flowed.xdp");
             FileInputStream inFragment1 = new FileInputStream("C:\\Adobe\tuc018_contact.xdp");
             FileInputStream inFragment2 = new FileInputStream("C:\\Adobe\tuc018_patient.xdp");
 
             //Create a Document object
             Document myMapSource = new Document(inSource);
 
             //Create a Document object
             Document inFragment1Doc = new Document(inFragment1);
 
             //Create a Document object
             Document inFragment2Doc = new Document(inFragment2);
 
             //Place all of the XDP files into the MAP
             inputs.put("tuc018_template_flowed.xdp",myMapSource);
             inputs.put("tuc018_contact.xdp",inFragment1Doc);
             inputs.put("tuc018_patient.xdp",inFragment2Doc);
 
 
             //Create an AssemblerOptionsSpec object
             AssemblerOptionSpec assemblerSpec = new AssemblerOptionSpec();
             assemblerSpec.setFailOnError(false);
 
             //Submit the job to Assembler service
             AssemblerResult jobResult = assemblerClient.invokeDDX(myDDX,inputs,assemblerSpec);
             java.util.Map allDocs = jobResult.getDocuments();
 
             //Retrieve the result PDF document from the Map object
             Document outDoc = null;
 
             //Iterate through the map object to retrieve the result XDP document
             for (Iterator i = allDocs.entrySet().iterator(); i.hasNext();) {
                 // Retrieve the Map object’s value
                 Map.Entry e = (Map.Entry)i.next();
 
                 //Get the key name as specified in the
                 //DDX document
                 String keyName = (String)e.getKey();
                 if (keyName.equalsIgnoreCase("tuc018result.xdp"))
                 {
                     Object o = e.getValue();
                     outDoc = (Document)o;
 
                     //Save the result XDP file
                     File myOutFile = new File("C:\\AssemblerResultXDP.xdp");
                     outDoc.copyToFile(myOutFile);
                 }
             }
         }catch (Exception e) {
             e.printStackTrace();
         }
     }
 }

빠른 시작(SOAP 모드): Java API를 사용하여 PDF 문서 교정

다음 코드 예제에서는 PDF 문서를 PDFUtility
PDFUtility Acrobat을 사용하여 교정으로 표시된 PDF만 교정할 수 있습니다.
/*
 * This Java Quick Start uses the SOAP mode and contains the following JAR files
 * in the class path:
 * 1. adobe-pdfutility-client.jar
 * 2. adobe-livecycle-client.jar
 * 3. adobe-usermanager-client.jar
 * 4. adobe-utilities.jar
 * 5. jboss-client.jar (use a different JAR file if AEM Forms is not deployed
 * on JBoss)
 *
 * These JAR files are located in the following path:
 * <install directory>/Adobe/Adobe_Experience_Manager_forms/sdk/client-libs/common
 *
 * The adobe-utilities.jar file is located in the following path:
 * <install directory>/Adobe/Adobe_Experience_Manager_forms/sdk/client-libs/jboss
 *
 * The jboss-client.jar file is located in the following path:
 * <install directory>/Adobe/Adobe_Experience_Manager_forms/jboss/bin/client
 *
 * If you want to invoke a remote AEM Forms instance and there is a
 * firewall between the client application and AEM Forms, then it is
 * recommended that you use the SOAP mode. When using the SOAP mode,
 * you have to include additional JAR files located in the following
 * path
 * <install directory>/Adobe/Adobe_Experience_Manager_forms/sdk/client-libs/thirdparty
 *
 * For information about the SOAP
 * mode and the additional JAR files that need to be included,
 * see "Setting connection properties" in Programming
 * with AEM Forms
 *
 * For complete details about the location of the AEM Forms JAR files,
 * see "Including AEM Forms library files" in Programming
 * with AEM Forms
 */

import java.util.*;
import com.adobe.livecycle.pdfutility.client.*;
import java.io.*;
import com.adobe.idp.Document;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactory;
import com.adobe.idp.dsc.clientsdk.ServiceClientFactoryProperties;

public class RedactPDF
{
    public static void main(String[] args)
    {
        try
        {
            //Set connection properties required to invoke AEM Forms
            Properties connectionProps = new Properties();
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_DEFAULT_SOAP_ENDPOINT, "https://'[server]:[port]'");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_TRANSPORT_PROTOCOL,ServiceClientFactoryProperties.DSC_SOAP_PROTOCOL);
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_SERVER_TYPE, "JBoss");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_USERNAME, "administrator");
            connectionProps.setProperty(ServiceClientFactoryProperties.DSC_CREDENTIAL_PASSWORD, "password");

            // Create a ServiceClientFactory object
            ServiceClientFactory myFactory = ServiceClientFactory.createInstance(connectionProps);

            // Create a PDF Utility client
            PDFUtilityServiceClient pdfUt = new PDFUtilityServiceClient(myFactory);

            // Specify a PDF document to Redact
            FileInputStream fileInputStream = new FileInputStream("C:\\Adobe\\RedactMarked.pdf");
            Document inDoc = new Document(fileInputStream);
            RedactionOptionSpec spec = new RedactionOptionSpec();

            // Convert the PDF document to redact
            RedactionResult redRes = pdfUt.redact(inDoc,spec);

            Document redactPDF = redRes.getDocument();

            //Save the returned Document object as an XDP file
            File redactedFile = new File("C:\\Adobe\\Redacted.pdf");
            redactPDF.copyToFile(redactedFile);
        }
        catch (Exception e)
        {
            e.printStackTrace();
        }
    }
}